CLASSIC STAINLESS BARN DOOR HARDWARE
SKU: 4584$310.00
Our versatile Classic Stainless Barn Door Hardware can be paired with any design style and feature a shiny stainless finish.
- All steel construction
- Rail is pre-drilled 16″ on center
- High-Pressure nylon wheels for quiet operation
- Sealed ball bearings for a smooth glide
- Fully adjustable rubber embedded door stops
WHAT’S IN THE BOX?
- Rail at ordered length
- Spacers, lag bolts, and washers for mounting
- (2) Rollers w/ mounting bolts (unless more are selected)
- (2) Motion Limiters (unless more are selected)
- (1) floor guide (unless more are selected)
- Installation Instructions
Wood Framed Doors
If you are ordering one of our wood framed barn doors or a track kit by itself, your track kit will come with a standard fin style floor guide. This fin is mounted to the floor and rides in a groove that has already been cut for you in the bottom of your barn door. If you cannot mount the guide to the floor we also have a wall mounted version as well!
Steel-Trimmed Doors
If you are ordering one of our steel-trimmed doors, your track kits will come with a wall mounted system that wedges the door tight to the wall. Though the method changes all floor guides are low-profile and perform the same function.
Definitely not! There is a lot of noisy hardware out there that sound rough and unfriendly to use. Our track kits on the other hand are top of the line and use high-pressure nylon wheels, sealed ball bearings, and rubber bumper stops that all make for a high-functioning, quality, quiet glide. We like to encourage our customers, as a test, to open their new barn door with their little finger just to see how smooth it really is.
Our track kits come with fully adjustable stops so you can adjust your door to start and stop exactly where you need it to! Just use the provided allen wrench to loosen the set-screws, slide the stop to where you want it and then retighten. That's it!
Single Door System
To select the proper track length simply multiply the the barn door width in inches by (2x). Then round the length up to the nearest track length selection.
Ex: If you have a 37" wide barn door you would do the following calculation:
(37in x 2) / 12in = 6.16ft
You would then round up to the 6.5ft kit.
Double Door System
To select the proper track length simply multiply the width in inches of one barn door by (4x). Then round the length up to the nearest track length selection.
Ex: If you have a pair of 34" wide barn doors you would do the following calculation:
(34in x 4) / 12in = 11.33ft
You would then round up to the 12ft kit.
Bypass System
To select the proper track length simply multiply the width in inches of one barn door by (2x). Then round the length up to the nearest track length selection.
Ex: If you have a pair of 34" wide barn doors you would do the following calculation:
(34in x 2) / 12 = 5.66ft
You would then round up to the 6ft kit.
We recommend the following minimum measurements between the top of your door and the ceiling:
Classic / Top Mount / Spade: 6in minimum
Big Wheel: 9in minimum
Bypass Kits: 12in minimum
If you have trim around your door opening or your studs are not 16” on center, then you will want a backer board. You can either create a backer board using a new 1x4 or 1x6 and paint it the same color as your wall, or request to have us make one to match your door finish and texture!
Our hand-forged door pulls are meant to be a statement piece on the front of your barn door. Our flush mount handles on the other hand are most often recessed into the backside of your door. This is due to the small amount of space between the backside of your door and the wall. For spaces such as small pantries or closets where you will not be opening the door from the back side you can opt to omit the flush mount handle.
Our track kits are virtually universal and should work with most doors. Our kits are built to handle barn doors that are 1.5 - 2” in thickness and weight less than 150lbs per section of rail. If your door fall in those two ranges then it will work!
- A minimum of (6) inches is required between the top of the door and the ceiling for hardware to function properly.
- Weight limit is 150lbs per rail. For applications greater than 150lbs please add additional rollers to door and additional mounting bolts to the rail.
- All black hardware is powder coated
- DOOR NOT INCLUDED
- SHIPS for FREE
Related products
